The E-50M external blinds with flat slat (50 mm width) have both a highly functional and aesthetic design that improves the appearance of façades and at the same time protects the interior from the sun. Thanks to the flat shape of slats, the raised bundle of slats occupies considerably less space and thus has a reduced impact on the window compared to external blinds with slats with consolidated borders.
A strong guiding plastic-coated steel wire with diameter 2 mm ensures the safe and fully functional operation of the blind. The blind is controlled by a crank handle or motor.
We offer the aluminium bottom profile and wire brackets in white or silver colour and in elox as standard. The bottom profile inclusive the wire bracket can be delivered in any colour according to the RAL colour swatch for additional price. The upper profile is made of aluminium of zinc-coated steel plate. An aluminium coveing sheet can be used for covering the upper profile and the raised bundle of slats, and is delivered in any colour according to the RAL colour swatch or in elox.
The colour of slats – we offer 8 standard colour shades, for orders with a surface area above 70 m2 we offer slats in any colour you choose.
Basic technical parameters:
| Maximum width of blind: | 350 cm |
| Maximum height of blind: | 300 cm |
| Type of blind | Min. width of blind | Max. area of blind |
| E-50M operation by crank handle | 40 cm | 10 m2 |
| E-50K operation by motor | 60 cm | 14 m2 |
Connecting blinds
It is possible to connect more blinds to one control. However, if the motor is placed in the middle of the assembly, there is a maximum of 3 blinds to one control.
The additional rule that there may be at most 5 bearings (revolving mechanisms) on each side of the motor must also be observed.
Leave approx. 2 cm gap between the connected blinds.
Material of blinds:
slats - aluminium, two-sided colour-adjusted, width of slats: 50 mm, thickness of slats: 0,23 mm
upper profile - 56 x 58 mm of extruded aluminium or zinc-coated steel plate
lower profile - extruded aluminium across width of slats (in white RAL 9016, silver RAL 9006 or elox)
guiding wire - steel, coated with transparent plastics Ø 2 mm
cover plate - bent 1,5 mm thick aluminium plate
fabric supports and strips - special synthetic fibres, grey tilt tape, grey lift tape 6 mm
